| Manufacturer of SS Wire Mesh / Filters / Screen / Gaskets
   
Non - Woven Sintered Metal Fiber Filter Media
 
  Non-woven filter media are made of ultra thin microscopic 316 L stainless steel fibers are sintered into a grade pore structure, to meet high standards for wide range of filtration application. This are designed to perform under high pressure and in high temperature unto 6500 c, this filter media has high dirt holding capacity, available in wide range, 5u to 40u. These filter media are used for polymer filtration. These are generally used in filter pack with wire mesh combination as a support mesh.
   
 
   
Characteristics
  High porosity
  High dirt holding capacity (for in-depth filtration), Long on-stream life-time, High flow rates: up to 20 times higher versus other media, +Low pressure drop
(lower energy cost)
  Thin Membrane
  Cleanable, superior backwash and back pulse capabilities, Easy to pleat and weld.
  Stainless steel and other alloys available
  Heat and corrosion resistant (dep. on alloy), Not brittle, Chemical cleaning possible, Weldable, Low thermal expansion and no thermal shock.
   
We held stock of Non - woven Filter medium of following specifications :
   
 
Characteristic Non - Woven Woven Mesh
Porosity 50-85% < 50%

Flow rate

+ + + + + - - -
Thickness 0.15 - 1 m.m. 0.1 - 0.5 mm
Dirt holding + + + + + - - -
Pressure drop + + + + + - - -
Corrosion resistance Excellent Good
 
Type Bubble point Pressure (BPP) Filtration Based on BPP AIR
Porosity % permeability
3AL3 12300 3 70 10.00
5AL3 7600 5 80 34.00
7AL3 5045 7 74 62.00
10AL3 3700 10 78 108.00
15AL3 2470 15 80 180.00
20AL3 1850 20 82 265.00
25AL3 1480 25 79 325.00
30AL3 1235 30 79 450.00
40AL3 925 40 76 620.00
 
We source these filter medium for
BAKEART INDUSTRIES
 
 
 
 
 
 
 
About Us | Products | Inquiry | Contact Us | Sitemap | Home